Non-US/Canadian Companies, please click here

wire 2018 Specialist Article No.3

Technical Article 10: High-performance wire products in automotive engineering The wire, cable and wire-processing industries and the wire 2018 trade fair

Wire and wire-based products – i.e. cables, springs, screws and bolts – can be found almost everywhere. No technical systems could function without them, and neither would there be any technical progress. As the demands on technical systems are growing, the performance of such components is gradually being stretched further and further. Wire products must provide reliable service even under the most challenging conditions. They are used, for example, in automotive engineering – an industry that drives innovation in the wire industry.

A modern car has nearly 1,000 springs, and their reliable operation has a major impact on safety and passenger comfort. Springs are often expected to perform at the highest level, e.g. in the valves which they cause to close in a combustion engine. Situated within a four-stroke engine, a valve spring must cope with up to 10 billion movements during a 120,000 miles trip. In addition to mechanical strain, a valve spring must also withstand extreme heat, hot gases and substantial temperature fluctuations. If a spring breaks, it is likely to cause severe engine damage.

Other important wire products are screws and bolts, since so many components are connected this way. A modern vehicle has over 1,000 screw fittings and bolted connections, of which 250 to 300 can be found inside the engine. It’s a place where up to 150 different types of screws and bolts are in use. All of them must have very narrowly defined tolerances in terms of physical properties, and they must also be convenient to insert and assemble, so that automated processing can largely proceed undisturbed.

Metal mesh, too, plays a major role. Made either from stainless steel wire or from certain non-ferrous metals, it is used, among other things, for filtering exhaust gas from combustion engines, thus helping to reduce carbon monoxide and particulate emissions. In an exhaust gas recirculation system such a filter ensures that particles from the combustion process or from the particulate trap cannot reach the turbocharger or engine, where this would have negative consequences. The stainless steel wire in a metal mesh has a thickness of only 35 µm, so that it is thinner than a human hair. Moreover, it can bear temperatures of 800°C and even more.

One of the most complex, most expensive and heaviest components in a modern vehicle is its on-board electrical system, once referred to as wiring harness. This is where the cables are assembled – cables which supply the ever increasing electrical and electronic components of a vehicle with power, while others transmit electronic signals. The VW Beetle, built around 1950, was equipped with a handy wiring harness that weighed no more than a few kilograms and whose cables had a total length of about 262 feet, with just over 70 electrical components connected to them. By contrast, today’s on-board electrical systems comprise up to 4,000 cables, with a length of up to 3.7 miles and up to 60 kilograms in weight. Electric and hybrid vehicles are especially demanding on the cable harness and the cables. Some cables have a high voltage of up to 1,000 volt and must withstand far higher currents and higher temperatures than their predecessors.

The wire 2018 trade fair in Düsseldorf, Germany

The latest developments in manufacturing technology, developments and trends in the wire, cable and wire-processing industries will be presented at wire 2018, the leading international trade fair for the wire and cable industry. The concurrent staging of Tube 2018, International Pipe and Tube Trade Fair, will create valuable synergy effects for attendees. Both events will be held from April 16 – 20, 2018 in Düsseldorf, Germany.

For wire and Tube 2018 press information, contact:
Anne Meerboth-Maltz
E-mail: ameerboth@mdna.com
Tel. (312) 781-5185

Messe Dusseldorf North America Located at 150 N. Michigan Avenue, Suite 2920, Chicago, IL. Phone: 312-781-5180. .